Full Mock Exam · Timed

Utah Contractor Law Full Mock Exam

Technical review pending. No reviewer on our panel covers this topic yet. Every fact links its official source. Our Reviewers

Sit a complete timed exam under test-centre conditions. You see no answers until you submit, then you get a score report by section and a full review with explanations.

Exam Format · Practice Format

Before You Begin

Questions60Practice format
Time Limit120 minPractice format
Pass Mark70%Official
Question Pool151Drawn at random

Prov lists the Utah Contractors Business and Law exam as 60 questions in 120 minutes, 70% to pass, open book (bulletin effective October 29, 2026). This unofficial mock matches that length, time and pass mark but covers Utah Code 58-55 only, not the business and finance parts. Source: Prov Utah Contracting Candidate Information Bulletin.

  • The timer starts when you begin and the exam submits itself when time runs out.
  • Move freely with Previous, Next or the numbered navigator, and flag any question to come back to.
  • No feedback is shown until you submit. Unanswered questions count as wrong.
  • Nothing is sent anywhere; the exam runs entirely in your browser.

Adaptive Practice Instead

These are original questions written by the Trade Exam Hub editorial team from the cited official sources. They are not real exam questions, and no exam body endorses this site. See all full mock exams.

What the Utah Contractor Law Mock Exam Covers

Each attempt draws 60 questions at random from a pool of 151. The pool covers these topics. Your score report breaks your result down the same way, so you can see which areas need more study.

TopicQuestions in PoolShare
Qualifications2517%
Renewal, CE and Exemptions2013%
Qualifiers and Financial Responsibility139%
Unlawful and Unprofessional Conduct149%
Penalties and Citations7952%

About 52% of the pool is recall and core-concept questions. The other 48% are harder applied questions, such as scenarios, calculations or details that are easy to confuse.

Utah Contractor Law Mock Exam Pacing Plan

You have 120 minutes for 60 questions, which is about 2.0 minutes per question. Use these checkpoints to stay on pace:

CheckpointBe at or past questionElapsed time
First quarter1530 min
Halfway3060 min
Three quarters4590 min

If you are behind, flag any question that is taking too long and move on. Leave a few minutes at the end to go back to your flagged questions. Unanswered questions count as wrong, so give an answer to every question before time runs out.

What Score Do You Need?

To pass, you need 42 of 60 correct (70%), so you can miss up to 18 questions. This pass mark comes from the official source cited above. We suggest scoring 10 points above the pass mark on two attempts in a row before you book the real exam, because the pool here is smaller than the official bank.

Sample Utah Contractor Law Mock Exam Questions

Here are three questions from the pool, with their answers and sources.

Q1. Which Utah license applicants need no division-administered exam?
  • Apprentice electricians, apprentice plumbers and specialty contractors (correct)
  • General building contractors
  • Residential electrical contractors
  • General engineering contractors

Source text: “for licensure as an apprentice electrician, apprentice plumber, or specialty contractor, no division-administered examination is required…” Reference: Utah Code § 58-55-302.

Q2. How often are Utah construction trades licenses renewed?
  • On a two-year cycle set by rule (correct)
  • Every year
  • Every three years
  • Every four years

Source text: “shall be issued in accordance with a two-year renewal cycle established by rule…” Reference: Utah Code § 58-55-303.

Q3. Where must the contractor's license number appear when a license is required?
  • On all permit applications, contracts, agreements and bids (correct)
  • Only on trucks
  • Only on invoices
  • Only on the website

Source text: “shall be made a part of all permit applications, contracts, agreements, or bids…” Reference: Utah Code § 58-55-304.

How to Use Your Score Report

  1. Sort by topic. Start your next study session with any topic where you scored below 70%.
  2. Read the source. Each answer cites a section or quotes its source text. Read the surrounding passage, not just the answer line.
  3. Drill, then retest. Use the adaptive practice test on your weak topics. It gives you more of the kinds of questions you miss. Then take this mock again for a new random set.
  4. Return to the guide. The Utah Contractor Law guide covers exam fees, scheduling, retake rules and what to bring on test day.

Sources Behind These Questions

Questions in this pool cite these references: Utah Code § 58-55-302; Utah Code § 58-55-303; Utah Code § 58-55-302.5; Utah Code § 58-55-304; Utah Code § 58-55-305; Utah Code § 58-55-306. Each question shows its exact reference when you review your answers.

Frequently Asked Questions

How many questions are on the Utah Contractor Law mock exam?

This mock has 60 questions, drawn at random from a pool of 151, so each attempt is different. The count is a practice format, because the official length is not published or our bank covers only part of the exam.

How long do I get, and how fast should I work?

The timer is set to 120 minutes, or about 2.0 minutes per question. Aim to be past question 30 by minute 60.

What score do I need to pass the Utah Contractor Law mock?

70%, which is 42 of 60 correct. That pass mark comes from the cited official source.

Are these real Utah Contractor Law exam questions?

No. They are original questions written from the official sources cited in each answer, and no exam body endorses them. Use them to find weak topics, then confirm the details in the source.

Is the Utah Contractor Law mock exam free?

Yes. There is no login and no sign-up, and the exam runs entirely in your browser. Nothing you enter is sent to us.